HOW TO INSTALL WALL DECALS WITH TRANSFER TAPE
*If applied on a freshly painted wall, please wait 2 weeks after painting before applying the decals.
Use a soft cloth with water to clean the application surface. Let it dry.
Then, if not already done, individually cut the wall decals.
Use masking tape to position the decals individually on the surface before applying.
Carefully peel off the back layer from the decal. Only the vinyl and the clear transfer tape should remain.
Place your decal on the application surface. Use a plastic card or squeegee to rub and smooth the decal onto the surface.
Remove the clear transfer tape by peeling it away slowly and smoothly starting from the corner. If the decal remains on the transfer tape and pulls away from surface, reapply and rub the decal on to the surface once again. Finally, only the decal should remain on the surface.
How to install peel and stick wall decals
* If applied on a freshly painted wall, please make sure to wait 2 weeks after painting before applying the decals.
HOW TO REMOVE
Peel the decal away from the wall at a 45 degree angle slowly and controlled to ensure there is no damage upon removal.