Use a soft cloth with water to clean the application surface. Let it dry.

Then, if not already done, individually cut the wall decals.

Use masking tape to position the decals individually on the surface before applying.

Carefully peel off the back layer from the decal. Only the vinyl and the clear transfer tape should remain.

Place your decal on the application surface. Use a plastic card or squeegee to rub and smooth the decal onto the surface.

Remove the clear transfer tape by peeling it away slowly and smoothly starting from the corner. If the decal remains on the transfer tape and pulls away from surface, reapply and rub the decal on to the surface once again. Finally, only the decal should remain on the surface.

Use a soft cloth with soap and water to clean the application surface. Let it dry.

If you prefer, use masking tape to position the decals individually on the surface before applying to ensure a proper layout or simply apply them directly to the wall and move them around as many times as needed.

When applying, gently rub the decal on to the surface to ensure proper adhesion.

Your wall is complete! Enjoy your new wall!

Peel the decal away from the wall at a 45 degree angle. Fabric peel and stick wall decals can be removed and repositioned many times.